Your product performance is our concern
Being experts in testing we are committed to supplying 100% reliable test results. We help you save time and costs by optimizing your test procedures. Ask us for advice on quality testing.
Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test).
Plastics - Differential scanning calorimetry (DSC) Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT).
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading.
Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling (equivalent to EN 12 293).
Polyethylene(PE) pipes and fittings - Determination of the tensile strength and failure mode of test pieces from a butt-fused joint.
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (notch test).
Plastics piping systems for hot and cold water installations - Guidance for classification and design.
Thermoplastics pipes - Determination of ring stiffness.
Thermoplastics pipes - Determination of creep ratio.
Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT).
Plastics - Determination of tensile-impact strength.
Polyolefin pipes and fittings; Determination of carbon black content by calcination and pyrolysis; Test method and basic specification.
Thermoplastics pipes - Determination of tensile properties.
Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method.
Plastics - Determination of apparent density of material that can be poured from a specified funnel.
ISO 2507 defines how to determine the Vicat softening temperature (VST) of thermoplastic pipes and fittings.
Specifies a method for determining the resistance to external blows of thermoplastic pipes of circular cross-section, called the staircase method.
Specifies methods for leak tightness and pressure cycling tests on plastics fittings. Explicitly mentions cyclic internal pressure tests as part of performance testing.
Standard provides the qualification procedure for type approval of the tightness of hermetically sealed and closed components, joints and parts used in refrigerating systems and heat pumps as described in relevant parts of ISO 5149.
Plastics piping systems - Plastics components - Determination of dimensions.
Thermoplastics piping systems for underground non-pressure applications — Test method for leaktightness of elastomeric sealing ring type joints.
Plastics piping systems – Thermoplastics pipes and fittings for hot and cold water – Test method for the resistance of mounted assemblies to temperature cycling (equivalent to ISO 19893).
ISO 4427-1:2007 specifies the general aspects of polyethylene (PE) piping systems (mains and service pipes) intended for the conveyance of water for human consumption, including raw water prior to treatment and water for general purposes. It also specifies the test parameters for the test methods to which it refers.
Superseeded by ISO 2505:2023. Polyethylene pipes (PE) - Longitudinal reversion - Test methods and specification.
Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics.
Plastics - Unplasticized cellulose acetate; determination of moisture content.
International test standard for determining the tensile properties of plastics. It includes several parts, with ISO 527-1 covering general principles and others specifying test conditions for different plastic types. The standard is used to assess plastic materials' tensile strength, modulus, and elongation.
Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST).
Determinaton of Izod impact strength. For conducting resilience tests on rigid plastic materials in order to determine their impact fragility characteristics under standard stress conditions.
Determination of Charpy impact strength. For conducting resilience tests on rigid plastic materials in order to determine their impact fragility characteristics under standard stress conditions.
Plastics - Determination of temperature of deflection under load.
International standard that specifies the test method for determining the longitudinal reversion of thermoplastics pipes when exposed to heat.
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure Part 1: General method, Part 2: Preparation of pipe test pieces, Part 3: Preparation of components, Part 4: Preparation of assemblies.
Standard test method for tensile-impact energy to break plastics and electrical insulating materials.
ASTM D 2992 outlines procedures to determine the long-term strength of fiberglass-reinforced thermosetting-resin pipe and fittings by subjecting them to internal hydrostatic pressure under controlled conditions.
Specifies requirements for flexible, leak-resistant joints in PVC and PE pipes for gravity-flow sewer systems. It defines hydrostatic pressure tests and assembly procedures.
ASTM D3212 is for joints in plastic drain and sewer pipes that use flexible elastomeric seals. Applies to non-pressure, gravity flow systems such as stormwater and sanitary sewers.
Standard test method for unnotched cantilever beam impact resistance of plastics.
Standard test method for determination of the impact resistance of plastic pipe and fittings by means of a tup (falling weight).
Standard test method for determination of external loading characteristics of plastic pipe by parallel plate loading.
Standard test methods for apparent density, bulk factor, and pourability of plastic materials.
Standard test methods for determining the Izod pendulum impact resistance of plastics.
Standard test method for tensile properties of plastics.
Standard test method for deflection temperature of plastics under flexural load in the edgewise position.
Standard test method for Melt Flow Rates of thermoplastics by extrusion plastometer.
Standard test method for Vicat softening temperature of plastics.
Standard test method for time-to-failure of plastic pipe under constant internal pressure.
Standard test method for resistance to short-time hydraulic failure pressure of plastic pipe, tubing, and fittings.
Standard test method for carbon black content in olefin plastics.
Flexible hose assemblies in drinking water installations - Functional requirements and test methods.
Superseeded by EN 19893:2018 Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling.
Plastics piping systems - Determination of moisture content in thermoplastics by coulometry.
Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time.
Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility.
Plastics piping and ducting systems - Thermoplastics pipes - Determination of resistance to external blows by the staircase method.
Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints.
Superseeded by ISO 3127 . Test method for thermoplastics pipes resistance to external blows by the round-the-clock-method.
Superseeded by EN ISO 2505. Plastics piping and ducting systems- Thermoplastics pipes; Determination of the longitudinal reversion.
Superseeded by EN ISO 9852. Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT).
Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings - Specification for chlorinated polyvinyl chloride (PVC-C) pipes and associated fittings and solvent cement.
Testing of rubber - Determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test.
Materials testing machines - Impact test - Particular requirements on pendulum impact testing machines with a capacity of nominal energy <= 50 J and verification.
Testing of Plastics - Determination of the melt flow index of thermoplastics.
Standard provides requirements for the manufacture and qualification of spoolable reinforced plastic line pipe in oilfield and energy applications.
Compound pipes in the drinking water installation - Requirements and testing.
Compound pipes in the drinking water installation - Requirements and testing.
Compound pipes in the drinking water installation - Requirements and testing.
Nonelectrical refrigerant-containing components and accessories, intended for field installation in accordance with the Safety Code for Mechanical Refrigeration, ASHRAE 15.
For determining the resistance to slow crack growth of polyethylene pipes with external point load (Annex A3).
Laboratory equipment for pipe and fitting testing. For all applications and standards within pressure test, impact test, leak tightness test, rapid crack propagation test, compression test, tensile test.
View products
Analyse and determine the correct quality of the raw material to ensure end product capabilities with the wide range of high-end equipment including tests in respect of DSC, MFR, MVR, density, OIT etc.
View products
The preparation equipment is designed to ensure optimal testing. Sample preparation range consists of i.e. laboratory saws, copy millers, notch millers, conditioning chambers, thermo tanks and ovens.
View productsWe are at your disposal for any questions, comments and suggestions. We look forward to hearing from you.
Feel free to contact us using the contact form below.
We strive to answer all inquiries within 24 hours (on working days).
