3 main product categories

Pipe & fitting test equipment

Laboratory equipment for pipe and fitting testing. For all applications and standards within pressure test, impact test, leak tightness test, rapid crack propagation test, compression test, tensile test.

View products

Raw material testing

Analyse and determine the correct quality of the raw material to ensure end product capabilities with the wide range of high-end equipment including tests in respect of DSC, MFR, MVR, density, OIT etc.

View products

Preparation equipment

The preparation equipment is designed to ensure optimal testing. Sample preparation range consists of i.e. laboratory saws, copy millers, notch millers, conditioning chambers, thermo tanks and ovens.

View products

Short time to market through quality testing

Your product performance is our concern

Being experts in testing we are committed to supplying 100% reliable test results. We help you save time and costs by optimizing your test procedures. Ask us for advice on quality testing.

Maximum up-time

We are close by if your equipment needs service. Our engineers perform global on-site and remote service and support, so you can rest assured, we will eliminate the risk of down-time.

360° PRODUCT UNIVERSE

Experience our products in 360°

Discover how unique features and engineered solutions can help you optimize your test procedures. Visit our 360° Universe with interactive 3D visuals and videos of the SCITEQ equipment.

Experience it here

Find the standards you need

 

There are numerous international standards referring to testing. Testing standards for instance ensure consistent product quality with a high level of comparability.

We supply testing equipment to fulfill any national and international testing standard within our field of business and we specialize in delivering solutions and customised equipment.

In case you do not find the standard you are looking for in the below list, please contact us for further information

  • +EN
  • +DIN
  • +ASTM
  • +BS
  • +DVGW
  • +PAS
  • +ISO

EN 12 118

Plastics piping systems - Determination of moisture content in thermoplastics by coulometry.

View products

EN 12 293

Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling.

View products

EN 1277

Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints.

View products

EN 13 618

Flexible hose assemblies in drinking water installations - Functional requirements and test methods.

View products

EN 13 828

Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Tests and requirements. Section 7.6 Endurance test.

View products

EN 1411

Plastics piping and ducting systems - Thermoplastics pipes - Determination of resistance to external blows by the staircase method.

View products

EN 1446

Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility.

View products

EN 200

Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2 - General technical specification. Section 12.1 Mechanical endurance characteristics of the operating mechanism.  

View products

EN 580

Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT).

View products

EN 728

Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time.

View products

EN 743

Plastics piping and ducting systems- Thermoplastics pipes; Determination of the longitudinal reversion.

View products

EN 744

Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock-method.

View products

DIN 51 222

Materials testing machines - Impact test - Particular requirements on pendulum impact testing machines with a capacity of nominal energy <= 50 J and verification.

View products

DIN 53 504

Testing of rubber - Determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test.

View products

DIN 53 735

Testing of Plastics - Determination of the melt flow index of thermoplastics.

View products

ASTM D 1238

Standard test method for Melt Flow Rates of thermoplastics by extrusion plastometer.

View products

ASTM D 1525

Standard test method for Vicat softening temperature of plastics.

View products

ASTM D 1598

Standard test method for time-to-failure of plastic pipe under constant internal pressure.

View products

ASTM D 1599

Standard test method for resistance to short-time hydraulic failure pressure of plastic pipe, tubing, and fittings.

View products

ASTM D 1603

Standard test method for carbon black content in olefin plastics. 

View products

ASTM D 1822

Standard test method for tensile-impact energy to break plastics and electrical insulating materials.

View products

ASTM D 1895

Standard test methods for apparent density, bulk factor, and pourability of plastic materials.

View products

ASTM D 2412

Standard test method for determination of external loading characteristics of plastic pipe by parallel plate loading.

View products

ASTM D 2444

Standard test method for determination of the impact resistance of plastic pipe and fittings by means of a tup (falling weight).

View products

ASTM D 2463

Standard test method for drop impact resistance of blow-molded thermoplastic containers.

View products

ASTM D 256

Standard test methods for determining the Izod pendulum impact resistance of plastics.

View products

ASTM D 4812

Standard test method for unnotched cantilever beam impact resistance of plastics.

View products

ASTM D 638

Standard test method for tensile properties of plastics.

View products

ASTM D 648

Standard test method for deflection temperature of plastics under flexural load in the edgewise position.

View products

BS 2782

Methods of testing - Plastics - Introduction.

View products

BS 7291

Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings - Specification for chlorinated polyvinyl chloride (PVC-C) pipes and associated fittings and solvent cement.

View products

DVGW W 534

Compound pipes in the drinking water installation - Requirements and testing.

View products

DVGW W 542

Compound pipes in the drinking water installation - Requirements and testing.

View products

DVGW W 543

Compound pipes in the drinking water installation - Requirements and testing.

View products

PAS 1075:2009

For determining the resistance to slow crack growth of polyethylene pipes with external point load (Annex A3).

View products

ISO 10 508

Plastics piping systems for hot and cold water installations - Guidance for classification and design.

View products

ISO 11 357-6

Plastics - Differential scanning calorimetry (DSC)  Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT).

View products

ISO 1133

Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics.

View products

ISO 1167

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure Part 1: General method, Part 2: Preparation of pipe test pieces, Part 3: Preparation of components, Part 4: Preparation of assemblies.

View products

ISO 13 260

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading.

View products

ISO 13 477

Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test).

View products

ISO 13 479

Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (notch test).

View products

ISO 13 480

Polyethylene pipes - Resistance to slow crack growth - Cone test method.

View products

ISO 13 953

Polyethylene(PE) pipes and fittings - Determination of the tensile strength and failure mode of test pieces from a butt-fused joint.

View products

ISO 13 968

Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility.

View products

ISO 16 770

Plastics - Determination of environmental stress cracking (ESC) of polyethylene - Full-notch creep test (FNCT).

View products

ISO 179

Determination of Charpy impact strength. 
For conducting resilience tests on rigid plastic materials in order to determine their impact fragility characteristics under standard stress conditions.

View products

ISO 180

Determinaton of Izod impact strength. 
For conducting resilience tests on rigid plastic materials in order to determine their impact fragility characteristics under standard stress conditions.

View products

ISO 19 893

Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling  (equivalent to EN 12 293).

View products

ISO 2505

Thermoplastics pipes - Longitudinal reversion - Test method and parameters.

View products

ISO 2506

Polyethylene pipes (PE) - Longitudinal reversion - Test methods and specification.

View products

ISO 306

Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST). 


View products

ISO 3126

Plastics piping systems - Plastics components - Determination of dimensions.

View products

ISO 3127

Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method.

View products

ISO 3478

Polypropylene (PP) pipes - Determination of longitudinal reversion.

View products

ISO 527

Plastics - Unplasticized cellulose acetate; determination of moisture content.

View products

ISO 585

Plastics - Unplasticized cellulose acetate; determination of moisture content.

View products

ISO 60

Plastics - Determination of apparent density of material that can be poured from a specified funnel. 

View products

ISO 6259

Thermoplastics pipes - Determination of tensile properties.

View products

ISO 6964

Polyolefin pipes and fittings; Determination of carbon black content by calcination and pyrolysis; Test method and basic specification. 

View products

ISO 75

Plastics - Determination of temperature of deflection under load.

View products

ISO 8256

Plastics - Determination of tensile-impact strength.

View products

ISO 9852

Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT).

View products

ISO 9967

Thermoplastics pipes - Determination of creep ratio.

View products

ISO 9969

Thermoplastics pipes - Determination of ring stiffness.

View products
Need help?

Thank you!
We will contact you as soon as possible.