The SCITEQ end-closures for large diameters model 1525 are produced purely in stainless steel. The material has been selected for corrosion resistance, durability and weight.
The Air frame design and low weight eases the handling of large pipe samples. The weight is considerably lower for large diameter pipes compared to traditional large diameter end closures, yet a robust construction has been maintained. The lower weight and design features ensures easy handling when mounting. Further, grips for cranes have been
incorporated.
End closures without a tie-bar are produced for pipes in PE, PVC and PP. End closures are produced with a specific depth from O-ring to the internal bottom which ensures that even on chamfered and oval PE-pipes, the end-closure for large diameters is tight while pressurizing. The SCITEQ Air Frame end closures are used for relatively low pressures up to max. 60 bar in combination with temperatures between 20 to 95 degrees. The SCITEQ end closures model 1525 complies with the standards ASTM D 1598, ASTM D 1599 and ISO 1167.
For more information and technical specifications please see the brochure.
Associated equipment to the end closures – air frame for large diameters. Model 1525
Stainless steel
Ø315mm up to Ø2000mm
1/8" male connection and supplied with screw operated bleed valve.
up to 60 bar for up to DN 710 mm
up to 30 bar for DN 710 - 1200 mm
up to 13 bar for DN 1400
up to 10 bar for DN 1600
up to 8 bar for DN 1800
up to 6 bar for DN 2000
There are numerous international standards referring to testing. We supply testing equipment to fulfill any national and international testing standard within our field of business. In case you do not find the standard you are looking for in the below list, please contact us for further information
Standard test method for time-to-failure of plastic pipe under constant internal pressure.
Standard test method for resistance to short-time hydraulic failure pressure of plastic pipe, tubing, and fittings.
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure Part 1: General method, Part 2: Preparation of pipe test pieces, Part 3: Preparation of components, Part 4: Preparation of assemblies.
‘The SCITEQ lab saw is running great. It has cut our sample prep time in half’.
View the full caseYour personal contact with us does not end with the commissioning of your test equipment. We also care about the operation of your solution.
We want to ensure optimal up-time based on preventive maintenance and efficient problem solving. You will achieve higher efficiency, high test reliability and a long life-time on your equipment.
We believe service is the key to a fruitful and long lasting cooperatio
Our services
We give you quality tools to produce as cost-effectively as possible, while meeting the highest standards. You will find it is possible to reduce time-to-market saving time on testing.
We help you configure future proof solutions. The SCITEQ equipment and cloud based software is developed by our in-house R&D engineers and manufactured in Europe.
We are close by. We perform global on-site installation as well as service visits and we are of course available for support and advice daily, so you can rest assured your test equipment will have maximum up-time.
The wide range of SCITEQ standard products is available for very short delivery. We will ship directly to your site to help you meet your deadlines. Need a special version? Not a problem, we love the challange.
We are at your disposal for any questions, comments and suggestions. We look forward to hearing from you.
Feel free to contact us using the contact form below.
We strive to answer all inquiries within 24 hours (on working days).
