With the SCITEQ High Capacity burst & pressure test System, you can easily perform high volume static pressure tests and burst tests of PE plastic pipes and fittings of any dimension. The solution is highly customizable and can deliver pressure of up to 500 bars and volumes ranging from 8,5 liters per minute 500 liters per minute, thus offering you maximum flexibility and convenience. The internal water reservoir circulates the water, ensuring that there is adequate water supply when testing even large samples.
The use of high-quality materials and innovative design of the HCP means that the requested volumes and pressure are effortlessly delivered to the pipe sample. The unique combination of the pump and the accumulators allows for low installation cost and energy consumption.
The HCP can be run from either the controller or via. our web-based interface, allowing you to initiate and monitor tests remotely. Complying with the standards ISO 1167, ASTM D 1598 and ASTM D 1599.
Low installation cost and energy consumption
The use of high-quality materials and innovative design of the HCP means that the requested volumes and pressure are effortlessly delivered to the pipe sample. The internal water reservoir circulates the water, ensuring that there is adequate water supply when testing even large samples. The unique combination of the pump and the accumulators allows for low installation cost and energy consumption.
The SCITEQ microprocessor, has the SD RAM card back-up slot on all controllers, ensuring that all test setting data is saved and stored, no matter what happens. The HCP can be run from either the controller or via our web-based interface, allowing you to initiate and monitor tests remotely.
For more information and technical specifications please see the brochure.
Up to 100/160 bar / up to 300 bar (burst)
flow of 20,30,50,80 or 100 I/min - 200 bar in 60 sec
Up to 14 stations in total depending on pressure and flow
Burst up to 300 bar
380-400Vac 3 phase + N + PE, fused supply max. 63 amps
normal tap water supply, min. 2 and max. 6 bar
lead to gravity fed waste water
2100x1000x1900mm (LxWxH)
1000 kgs
There are numerous international standards referring to testing. We supply testing equipment to fulfill any national and international testing standard within our field of business. In case you do not find the standard you are looking for in the below list, please contact us for further information
Standard test method for time-to-failure of plastic pipe under constant internal pressure.
Standard test method for resistance to short-time hydraulic failure pressure of plastic pipe, tubing, and fittings.
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure Part 1: General method, Part 2: Preparation of pipe test pieces, Part 3: Preparation of components, Part 4: Preparation of assemblies.
ISO 4427-1:2007 specifies the general aspects of polyethylene (PE) piping systems (mains and service pipes) intended for the conveyance of water for human consumption, including raw water prior to treatment and water for general purposes. It also specifies the test parameters for the test methods to which it refers.
‘The SCITEQ lab saw is running great. It has cut our sample prep time in half’.
View the full caseYour personal contact with us does not end with the commissioning of your test equipment. We also care about the operation of your solution.
We want to ensure optimal up-time based on preventive maintenance and efficient problem solving. You will achieve higher efficiency, high test reliability and a long life-time on your equipment.
We believe service is the key to a fruitful and long lasting cooperatio
Our servicesWe give you quality tools to produce as cost-effectively as possible, while meeting the highest standards. You will find it is possible to reduce time-to-market saving time on testing.
We help you configure future proof solutions. The SCITEQ equipment and cloud based software is developed by our in-house R&D engineers and manufactured in Europe.
We are close by. We perform global on-site installation as well as service visits and we are of course available for support and advice daily, so you can rest assured your test equipment will have maximum up-time.
The wide range of SCITEQ standard products is available for very short delivery. We will ship directly to your site to help you meet your deadlines. Need a special version? Not a problem, we love the challange.