The SCITEQ end closures with tie-bar model 1530 are produced purely in stainless steel. The length of the tie-bar (rod) is defined in the appropriate testing standard. For example according to ISO 1167:2006 – Part 2: The free length, lo, of the pipe between end caps shall be at least three times the nominal outside diameter, dn, with a minimum of 250mm. If, for pipes with dn greater than 315mm, the specified minimum free length, lo, cannot be achieved, a shorter free length, lo, may be chosen with a minimum of two times dn, unless otherwise specified in the referring standard or specification.
End closures with a tie-bar are produced for pipes in PE, PVC and PP. End closures are produced with a specific depth from O-ring to the internal bottom which ensures that even on chamfered and oval PE-pipes, the end closure is 100% tight while pressurising. The SCITEQ end closures with tie-bar model 1530 complies with the standards ASTM D 1598, ASTM D 1599 and ISO 1167.
For more information and technical specifications please see the brochure.
Stainless steel AISI 304. Other stainless and acid resistant steel material at request.
Ø12mm up to Ø1200mm
1/8" male connection and supplied with screw operated bleed valve
Depends on standard, specifications and pipe sample diameter
There are numerous international standards referring to testing. We supply testing equipment to fulfill any national and international testing standard within our field of business. In case you do not find the standard you are looking for in the below list, please contact us for further information
‘The SCITEQ lab saw is running great. It has cut our sample prep time in half’.View the full case
Your personal contact with us does not end with the commissioning of your test equipment. We also care about the operation of your solution.
We want to ensure optimal up-time based on preventive maintenance and efficient problem solving. You will achieve higher efficiency, high test reliability and a long life-time on your equipment.
We believe service is the key to a fruitful and long lasting cooperatioOur services
We give you quality tools to produce as cost-effectively as possible, while meeting the highest standards. You will find it is possible to reduce time-to-market saving time on testing.
We help you configure future proof solutions. The SCITEQ equipment and cloud based software is developed by our in-house R&D engineers and manufactured in Europe.
We are close by. We perform global on-site installation as well as service visits and we are of course available for support and advice daily, so you can rest assured your test equipment will have maximum up-time.
The wide range of SCITEQ standard products is available for very short delivery. We will ship directly to your site to help you meet your deadlines. Need a special version? Not a problem, we love the challange.