The compact plug and play test unit with five fixed individual pressure stations ideal for smaller layouts. Incl. DPC system and ABX valves ensures consistent and unparalleled pressure accuracy. This cost effective and reliable solution is easy to setup and operate from any device via the web-based software.
The alarm visually alerts the user, in case of irregularities in the ongoing test.
SIGMAlite pressure solution determines the resistance (both long term and short term) to internal pressure on thermoplastic pipes, fittings and assemblies for conveyance of fluids. The product design complies with following pipe diameter configurations:
Dimensions: B542xD740xH652 mm
SCITEQ SIGMA pressure solution determines the resistance (both long term and short term) to internal pressure with up to 100bar/1450 psi on thermoplastic pipes, fittings and assemblies for conveyance of fluids,
complying with following test standards and equivalent:
SCITEQ’s intelligent Dynamic Pressure Control System ensures that test pressures are maintained with unparalleled accuracy no matter what size sample is connected to the system. Static, burst and step testing can all be accommodated.
The built-in alarm light instantly alerts the operator visually in case of irregularities in the ongoing test.
The browser-based SIGMA software is accessible from any device – any time, anywhere. The advantages are among others:
The fast and extremely easy to use interface enables easy operation and control of few as well as many simultaneous pressures tests with features such as dynamically adjusted finish time, full station overview and click less maneuvering.
Recipes are quickly set-up, saving time when starting up a new test (diameter) as well as repeating saved test parameters. Up to four different user-levels from Basic to Advanced, ensuring not only easy operation, but also offering simultaneous ‘view-only’ access for your interested partners and clients.
For more information and technical specifications please got to SIGMA software or check the brochure below.
The smart design of the SIGMAlite pressure cabinet offers easy access for servicing and the pressure test can operate during service or maintenance. The valves are NC (normally closed), each station will keep pressure when turned off. Drainage of pressure equipment for servicing only necessary servicing the A valve and this is very rarely necessary.
SCITEQ’s Dynamic Pressure Control System uses only approx. 1/3 of power compared to conventional systems.
SCITEQ is the only supplier of the DPCS system. Other systems on the market use pressure pumps that run constantly via a bypass/circulation valve, hence the power consumption will be equal to the motor size + the power consumption for the control unit. As we supply pressure with the DPCS system to a high pressure reservoir the running time of the pump is reduced by more the 90%, thereby significantly reducing the power consumption.
Our PLC control uses an electronic power transformer to generate 24 volt power to the solenoid. This electronic power transformer regulates the output according to the specific need.
Looking for more than 5 pressure test stations? SIGMA modular pressure test is an expandable test solution for larger layouts with minimum 5 pressure stations up to maximum 50 stations in one test rig/cabinet.
Associated equipment
Up to 100 bar/1450 psi regulated pressure output
Max. flow 2 l/min
5 individual pressure stations
3 phase 380-400Vac + N + PE, 16amps
mains water supply, 2-6 bar
lead to gravity fed waste water
740x542x652 mm (LxWxH)
There are numerous international standards referring to testing. We supply testing equipment to fulfill any national and international testing standard within our field of business. In case you do not find the standard you are looking for in the below list, please contact us for further information
Standard test method for time-to-failure of plastic pipe under constant internal pressure.
Standard test method for resistance to short-time hydraulic failure pressure of plastic pipe, tubing, and fittings.
Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling.
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure Part 1: General method, Part 2: Preparation of pipe test pieces, Part 3: Preparation of components, Part 4: Preparation of assemblies.
‘The SCITEQ lab saw is running great. It has cut our sample prep time in half’.
View the full caseYour personal contact with us does not end with the commissioning of your test equipment. We also care about the operation of your solution.
We want to ensure optimal up-time based on preventive maintenance and efficient problem solving. You will achieve higher efficiency, high test reliability and a long life-time on your equipment.
We believe service is the key to a fruitful and long lasting cooperatio
Our services
We give you quality tools to produce as cost-effectively as possible, while meeting the highest standards. You will find it is possible to reduce time-to-market saving time on testing.
We help you configure future proof solutions. The SCITEQ equipment and cloud based software is developed by our in-house R&D engineers and manufactured in Europe.
We are close by. We perform global on-site installation as well as service visits and we are of course available for support and advice daily, so you can rest assured your test equipment will have maximum up-time.
The wide range of SCITEQ standard products is available for very short delivery. We will ship directly to your site to help you meet your deadlines. Need a special version? Not a problem, we love the challange.
We are at your disposal for any questions, comments and suggestions. We look forward to hearing from you.
Feel free to contact us using the contact form below.
We strive to answer all inquiries within 24 hours (on working days).
