For conditioning pipe samples at specified temperatures for e.g. impact tests, RCP (Rapid Crack Propagation) tests and other similar tests. Room temperature down o -25 degrees C. Lower temperatures on request.
The conditioning chamber is as standard equipped with a cooling compressor on the roof of the chamber (other placements on request). The testing equipment can be placed inside the chamber by choosing the right dimension of the conditioning chamber.
The chamber is a modular system which can be supplied in various sizes. It takes only about 2-4 hours for two men to set it up, depending on size. Furthermore, the chambers are constructed from individual dividing panels and through corner panels for a high degree of sizing flexibility
For more information and technical specifications please see the brochure.
Associated equipment
Room temp. down to -20° C as standard other temperature range on request.
80 mm, 120 mm, or 160 mm.
Standard roof mounting. Other placement on request.
Standard voltage single phase 230V/50Hz (0 degree C) or three phase 400V/50Hz (-20 degree C).
Others on request.
1200 x 1200 x 1800 mm. (LxWxH) each module is 300 x 300 x 300 mm.
50 x 1700 mm, 700 x 1800 mm and 900 x 2000 mm.
There are numerous international standards referring to testing. We supply testing equipment to fulfill any national and international testing standard within our field of business. In case you do not find the standard you are looking for in the below list, please contact us for further information
Standard test method for time-to-failure of plastic pipe under constant internal pressure.
Standard test method for resistance to short-time hydraulic failure pressure of plastic pipe, tubing, and fittings.
Standard test method for determination of the impact resistance of plastic pipe and fittings by means of a tup (falling weight).
Standard test method for drop impact resistance of blow-molded thermoplastic containers.
Plastics piping and ducting systems - Thermoplastics pipes - Determination of resistance to external blows by the staircase method.
Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock-method.
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure Part 1: General method, Part 2: Preparation of pipe test pieces, Part 3: Preparation of components, Part 4: Preparation of assemblies.
‘The SCITEQ lab saw is running great. It has cut our sample prep time in half’.
View the full caseYour personal contact with us does not end with the commissioning of your test equipment. We also care about the operation of your solution.
We want to ensure optimal up-time based on preventive maintenance and efficient problem solving. You will achieve higher efficiency, high test reliability and a long life-time on your equipment.
We believe service is the key to a fruitful and long lasting cooperatio
Our services
We give you quality tools to produce as cost-effectively as possible, while meeting the highest standards. You will find it is possible to reduce time-to-market saving time on testing.
We help you configure future proof solutions. The SCITEQ equipment and cloud based software is developed by our in-house R&D engineers and manufactured in Europe.
We are close by. We perform global on-site installation as well as service visits and we are of course available for support and advice daily, so you can rest assured your test equipment will have maximum up-time.
The wide range of SCITEQ standard products is available for very short delivery. We will ship directly to your site to help you meet your deadlines. Need a special version? Not a problem, we love the challange.
We are at your disposal for any questions, comments and suggestions. We look forward to hearing from you.
Feel free to contact us using the contact form below.
We strive to answer all inquiries within 24 hours (on working days).
