The SCITEQ bulk density tester is intended for determination of apparent density (powder or granulate), bulk density factor and pourability of plastics materials. The bulk density tester comes in two models – model A complies with the standards ISO R 60 and ASTM D 1895 method A and model B complies with the standard ASTM D 1895 method B.
The bulk density tester is simple and easy to operate and maintenance is very low.
The tester consists of a feed funnel with a spring loaded swivel lid at the bottom, which is mounted on a solid bottom plate. The bottom plate is mounted with a cup for measuring the material and a catch pan (drip tray). After material has been flown freely into the measuring cup, the excess is scraped off by means of a straightedge blade.
The funnel is mounted on the vertical support along with the lid and straightedge blade. The measuring cup is polished inside and has a capacity of 100 ml +/- 0,5 ml for ISO R 60 and ASTM D 1895 method A. The measuring cup has a capacity of 400 ml for ASTM D 1895 method B.
For more information and technical specifications please see the brochure.
Model A: bulk density tester in accordance with ISO R 60 and ASTM D 1895 method A
Model B: bulk density tester in accordance with ASTM D 1895
Model A: cylindrical cup of 100ml
Model B: cylindrical cup of 400ml
Model A: 33 mm diameter opening at the bottom
Model B: 25.4 mm diameter opening at the bottom
Model A: mounted at a height 38 mm above the measuring cup
Model B: mounted at a height 38 mm above the measuring cup
stainless steel and aluminium (in accordance with the standard)
Model A: 290 x 250 x 400 mm (length x width x height)
Model B: 350 x 350 x 600 mm (length x width x height)
Model A: 5 kgs.
Model B: 6,5 kgs.
There are numerous international standards referring to testing. We supply testing equipment to fulfill any national and international testing standard within our field of business. In case you do not find the standard you are looking for in the below list, please contact us for further information
‘The SCITEQ lab saw is running great. It has cut our sample prep time in half’.View the full case
Your personal contact with us does not end with the commissioning of your test equipment. We also care about the operation of your solution.
We want to ensure optimal up-time based on preventive maintenance and efficient problem solving. You will achieve higher efficiency, high test reliability and a long life-time on your equipment.
We believe service is the key to a fruitful and long lasting cooperatioOur services
We give you quality tools to produce as cost-effectively as possible, while meeting the highest standards. You will find it is possible to reduce time-to-market saving time on testing.
We help you configure future proof solutions. The SCITEQ equipment and cloud based software is developed by our in-house R&D engineers and manufactured in Europe.
We are close by. We perform global on-site installation as well as service visits and we are of course available for support and advice daily, so you can rest assured your test equipment will have maximum up-time.
The wide range of SCITEQ standard products is available for very short delivery. We will ship directly to your site to help you meet your deadlines. Need a special version? Not a problem, we love the challange.