For pressure testing plastic pipes and fittings in PE, PEX, PVC, PP, PB etc., glass fibre pipes, tubes and hoses. The system is a modular airless pressure testing system with unparalleled accuracy. One BASE unit cabinet contains up to 5 individual pressure stations.
With the development of the X-ACT series, SCITEQ takes airless pressure testing to an even higher level with our latest elegant cabinet design and colour panel S40 controller. A further significant advantage is the low energy consumption of this system.
There are two main models depending on the requirement for max. pressure, namely for up to 100 bar and up to 160 bar. Each unit may have from two up to five individual pressure stations. This unit has been developed for those only needing a few pressure stations. The X-ACT pressure unit complies with the standards ISO 1167, ASTM D 1598 and ASTM D 1599 and equivalent.
For more information and technical specifications please see the brochure.
up to 100 bar BASE unit
up to 160 bar BASE unit
Max. 100 bar regulated pressure output at 2.5 l/min.
Max. 160 bar regulated pressure output at 2.5 l/min.
Other SCITEQ modules up to 200 and 250 bar, please contact SCITEQ A/S for more information
Up to 5 pressure stations
100 bar: Single phase 230V, 50Hz (TN-S)
160 bar: 3x400V, 50Hz (TN-S)
mains water supply, 2-6 bar
lead to gravity fed waste water
730x550x755mm (LxWxH) (including feet)
130 kg (100 bar)
170 kg (160 bar)
There are numerous international standards referring to testing. We supply testing equipment to fulfill any national and international testing standard within our field of business. In case you do not find the standard you are looking for in the below list, please contact us for further information
Standard test method for time-to-failure of plastic pipe under constant internal pressure.
Standard test method for resistance to short-time hydraulic failure pressure of plastic pipe, tubing, and fittings.
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure Part 1: General method, Part 2: Preparation of pipe test pieces, Part 3: Preparation of components, Part 4: Preparation of assemblies.
‘The SCITEQ lab saw is running great. It has cut our sample prep time in half’.
View the full caseYour personal contact with us does not end with the commissioning of your test equipment. We also care about the operation of your solution.
We want to ensure optimal up-time based on preventive maintenance and efficient problem solving. You will achieve higher efficiency, high test reliability and a long life-time on your equipment.
We believe service is the key to a fruitful and long lasting cooperatio
Our services
We give you quality tools to produce as cost-effectively as possible, while meeting the highest standards. You will find it is possible to reduce time-to-market saving time on testing.
We help you configure future proof solutions. The SCITEQ equipment and cloud based software is developed by our in-house R&D engineers and manufactured in Europe.
We are close by. We perform global on-site installation as well as service visits and we are of course available for support and advice daily, so you can rest assured your test equipment will have maximum up-time.
The wide range of SCITEQ standard products is available for very short delivery. We will ship directly to your site to help you meet your deadlines. Need a special version? Not a problem, we love the challange.
