The unique magnetic drive system combined with high-resolution linear encoders offer considerably higher accuracy compared with conventional systems.
The system offers accuracy of ± 0,5 bar on setup pressure and saw-tooth pressure cycles up to 60 ± 2 cycles pr. minute with a sample volume 75 mL / cycle (piston pump).
The automatic bleed function will always ensure that the sample is sufficiently aired-out (bleeding) before each test. This essential feature ensures accuracy is maintained during the complete test.
Test cycles are 100% stabile and rigid due to the ‘valve less’ design in combination with the auto bleed function. Furthermore the need for maintenance is minimal due to both the ‘valveless’ system and the magnetic drive.
The control touch panel with intuitive software solution offering a.o. automatic settings according to the specific sample ‘fingerprint’ as well as the following features:
The SCITEQ cyclic pressure tester complies with the standards ASTM D 1598, ASTM D 1599 and ISO 1167
0,5-60 bar*
*pressure/volume ratio is to be configured before order, as it is not possible to achieve max. volume at max. pressure. 60 bar is only achievable up to 28 ml and contentious operation. 75 ml is on achievable at up to 22 bar at contentious operation.
1
Max. 75 ml.
0,16-1Hz (10-60 cycles/min)
+/- 1 stroke/min.
+/- 1 bar
+/- 0,5 bar**
**The machine normally operates with accuracy down to 0,1 bar, but accuracy will drop as a function of increased pressure and strokes/min
2080 x 1000 x 1992mm (LxWxH)
Weight: approx. 700 kg
3x400V + Neutral, 50/60 Hz. Other voltages on request
There are numerous international standards referring to testing. We supply testing equipment to fulfill any national and international testing standard within our field of business. In case you do not find the standard you are looking for in the below list, please contact us for further information
Standard test method for time-to-failure of plastic pipe under constant internal pressure.
Standard test method for resistance to short-time hydraulic failure pressure of plastic pipe, tubing, and fittings.
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure Part 1: General method, Part 2: Preparation of pipe test pieces, Part 3: Preparation of components, Part 4: Preparation of assemblies.
‘The SCITEQ lab saw is running great. It has cut our sample prep time in half’.
View the full caseYour personal contact with us does not end with the commissioning of your test equipment. We also care about the operation of your solution.
We want to ensure optimal up-time based on preventive maintenance and efficient problem solving. You will achieve higher efficiency, high test reliability and a long life-time on your equipment.
We believe service is the key to a fruitful and long lasting cooperatio
Our servicesWe give you quality tools to produce as cost-effectively as possible, while meeting the highest standards. You will find it is possible to reduce time-to-market saving time on testing.
We help you configure future proof solutions. The SCITEQ equipment and cloud based software is developed by our in-house R&D engineers and manufactured in Europe.
We are close by. We perform global on-site installation as well as service visits and we are of course available for support and advice daily, so you can rest assured your test equipment will have maximum up-time.
The wide range of SCITEQ standard products is available for very short delivery. We will ship directly to your site to help you meet your deadlines. Need a special version? Not a problem, we love the challange.