ECO line FIVE pressure unit

For internal hydrostatic pressure testing of plastic pipes and fittings in PE, PEX, PVC, PP, PB etc., glass fibre pipes, tubes and hoses. The ECO line FIVE pressure unit is a compact plug-and-play pressure test solution with five fixed pressure stations and is ideal for smaller layouts.

ECO line pressure test unit is suitable for a large scope of internal pressure testing scenarios and complies with numerous testing national standards.

ECO line is the new generation of pressure testing helping our customers prepare for IoT and Industry 4.0. The System complies with the standards ISO 1167, EN 12 293 ASTM, D1598  and ASTM D 1599 and equivalent.

Product highlights

  • Compact and easy to use
  • Ideal for small layouts
  • Accurate and reliable
  • Intuitive operation and control
  • Report autogenerated to pdf. or csv.


The compact plug and play test unit with five fixed individual pressure stations ideal for smaller layouts. Incl. DPC system and ABX valves ensures consistent and unparalleled pressure accuracy. This cost effective and reliable solution is easy to setup and operate both static, step and burst tests from any device via the web-based software.

ECO line pressure solution determines the resistance (both long term and short term) to internal pressure on thermoplastic pipes, fittings and assemblies for conveyance of fluids. The product design complies with following pipe diameter configurations:

Dimensions: B542xD740xH652 mm


ECO line pressure test system determines the resistance (both long term and short term) to internal pressure on thermoplastic pipes, fittings and assemblies for conveyance of fluids. The product design complies with multiple test configurations,  following examples og pipe diameter configurations:

Up to Ø800 [mm] pipe diameter in long term test, provided the total volume expansion of the test specimen until pressure set point is reached is less than 120dm3 within 1 hour from test startup (max allowed pressuring time is 1 hour according to ISO1167 and max flow rate pr. station is 2l/min).

Up to Ø315 [mm] pipe diameter in short term test, provided the total volume expanding until fracture (burst) is less than 10.5dm3 within 70 seconds from test startup (max allowed pressuring time is 70s according to ASTM D1599 and max flow rate in a BURST station is 9l/min).

DPCS – Dynamic Pressure Control System

SCITEQ’s intelligent Dynamic Pressure Control System ensures that test pressures are maintained with unparalleled accuracy no matter what size sample is connected to the system. Static, burst and step testing can all be accommodated.


The browser-based SIGMA software is accessible from any device – any time, anywhere. The advantages are among others:

  • Browser based interface
  • Easy accessible real time data viewer
  • Multiple search and filtering options
  • fast & easy test setup
  • Multiple language options
  • Multiple specimen test per station
  • SQL database compatible with all server types

The intuitive and easy to use interface enables fast operation and control of few as well as many simultaneous pressures tests with features such as full station overview and real time data viewer. Test data can be extracted to pdf. an csv. files and when your test is completed you can export the test data to csv, PDF or directly to your database by SQL.

For more information and technical specifications please request the brochure below.

Easy maintenance

The smart design of the ECO line FIVE pressure cabinet offers easy access for servicing and the pressure test can operate during service or maintenance. The valves are NC (normally closed), each station will keep pressure when turned off. Drainage of pressure equipment for servicing only necessary servicing the A valve and this is very rarely necessary.

Energy consumption

SCITEQ’s Dynamic Pressure Control System uses only approx. 1/3 of power compared to conventional systems.

SCITEQ is the only supplier of the DPCS system. Other systems on the market use pressure pumps that run constantly via a bypass/circulation valve, hence the power consumption will be equal to the motor size + the power consumption for the control unit. As we supply pressure with the DPCS system to a high pressure reservoir the running time of the pump is reduced by more the 90%, thereby significantly reducing the power consumption.

Our PLC control uses an electronic power transformer to generate 24 volt power to the solenoid. This electronic power transformer regulates the output according to the specific need.

ECO line modular pressure series

Looking for more than 5 pressure test stations? ECO line modular pressure test is an expandable test solution for larger layouts with minimum 5 pressure stations up to maximum 50 stations in one test rig/cabinet.

Associated equipment to the ECO line FIVE pressure unit:

Associated equipment




Up to 100 bar regulated pressure output

Flow per station:

Max. flow 2 l/min


5 individual pressure stations

Electrical supply:

3 phase 380-400Vac + N + PE, 16amps

Water supply:

mains water supply, 2-6 bar


lead to gravity fed waste water


740x542x652 mm (LxWxH)

Download brochure

Experience it in 360°

Associated products

View all products


There are numerous international standards referring to testing. We supply testing equipment to fulfill any national and international testing standard within our field of business. In case you do not find the standard you are looking for in the below list, please contact us for further information


A story from the real world

Laboratory manager, WL Plastic

‘The SCITEQ lab saw is running great. It has cut our sample prep time in half’.

View the full case

Our service offerings

Your personal contact with us does not end with the commissioning of your test equipment. We also care about the operation of your solution.
We want to ensure optimal up-time based on preventive maintenance and efficient problem solving. You will achieve higher efficiency, high test reliability and a long life-time on your equipment.

We believe service is the key to a fruitful and long lasting cooperatio

Our services

Quality through all aspects

High quality products

We give you quality tools to produce as cost-effectively as possible, while meeting the highest standards. You will find it is possible to reduce time-to-market saving time on testing.

Smart solutions

We help you configure future proof solutions. The SCITEQ equipment and cloud based software is developed by our in-house R&D engineers and manufactured in Europe.

Personal service

We are close by. We perform global on-site installation as well as service visits and we are of course available for support and advice daily, so you can rest assured your test equipment will have maximum up-time.

Short lead time

The wide range of SCITEQ standard products is available for very short delivery. We will ship directly to your site to help you meet your deadlines. Need a special version? Not a problem, we love the challange.

Contact information

We are at your disposal for any questions, comments and suggestions. We look forward to hearing from you.

Contact form

Feel free to contact us using the contact form below.
We strive to answer all inquiries within 24 hours (on working days).

    Need help?

      Thank you!
      We will contact you as soon as possible.