There are numerous international standards referring to testing. Testing standards for instance ensure consistent product quality with a high level of comparability.
We supply testing equipment to fulfill any national and international testing standard within our field of business and we specialize in delivering solutions and customised equipment.
In case you do not find the standard you are looking for in the below list, please contact us for further information
Plastics piping systems - Determination of moisture content in thermoplastics by coulometry.
Superseeded by EN 19893:2018 Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling.
Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints.
Flexible hose assemblies in drinking water installations - Functional requirements and test methods.
Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Tests and requirements. Section 7.6 Endurance test.
Plastics piping and ducting systems - Thermoplastics pipes - Determination of resistance to external blows by the staircase method.
Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility.
Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2 - General technical specification. Section 12.1 Mechanical endurance characteristics of the operating mechanism.
Superseeded by EN ISO 9852. Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT).
Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time.
Superseeded by EN ISO 2505. Plastics piping and ducting systems- Thermoplastics pipes; Determination of the longitudinal reversion.
Superseeded by ISO 2505 . Test method for thermoplastics pipes resistance to external blows by the round-the-clock-method.
Materials testing machines - Impact test - Particular requirements on pendulum impact testing machines with a capacity of nominal energy <= 50 J and verification.
Testing of rubber - Determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test.
Testing of Plastics - Determination of the melt flow index of thermoplastics.
Standard test method for Melt Flow Rates of thermoplastics by extrusion plastometer.
Standard test method for Vicat softening temperature of plastics.
Standard test method for time-to-failure of plastic pipe under constant internal pressure.
Standard test method for resistance to short-time hydraulic failure pressure of plastic pipe, tubing, and fittings.
Standard test method for carbon black content in olefin plastics.
Standard test method for tensile-impact energy to break plastics and electrical insulating materials.
Standard test methods for apparent density, bulk factor, and pourability of plastic materials.
Specifies requirements for flexible, leak-resistant joints in PVC and PE pipes for gravity-flow sewer systems. It defines hydrostatic pressure tests and assembly procedures.
Standard test method for determination of external loading characteristics of plastic pipe by parallel plate loading.
Standard test method for determination of the impact resistance of plastic pipe and fittings by means of a tup (falling weight).
Standard test methods for determining the Izod pendulum impact resistance of plastics.
ASTM D 2992 outlines procedures to determine the long-term strength of fiberglass-reinforced thermosetting-resin pipe and fittings by subjecting them to internal hydrostatic pressure under controlled conditions.
ASTM D3212 is for joints in plastic drain and sewer pipes that use flexible elastomeric seals. Applies to non-pressure, gravity flow systems such as stormwater and sanitary sewers.
Standard test method for unnotched cantilever beam impact resistance of plastics.
Standard test method for tensile properties of plastics.
Standard test method for deflection temperature of plastics under flexural load in the edgewise position.
Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Pipe, Tubing and Systems to Hot Chlorinated Water
Methods of testing - Plastics - Introduction.
Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings - Specification for chlorinated polyvinyl chloride (PVC-C) pipes and associated fittings and solvent cement.
Compound pipes in the drinking water installation - Requirements and testing.
Compound pipes in the drinking water installation - Requirements and testing.
Compound pipes in the drinking water installation - Requirements and testing.
For determining the resistance to slow crack growth of polyethylene pipes with external point load (Annex A3).
Plastics piping systems for hot and cold water installations - Guidance for classification and design.
Specifies a method for determining the resistance to external blows of thermoplastic pipes of circular cross-section, called the staircase method.
Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics.
Plastics - Differential scanning calorimetry (DSC) Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT).
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure Part 1: General method, Part 2: Preparation of pipe test pieces, Part 3: Preparation of components, Part 4: Preparation of assemblies.
Thermoplastics piping systems for underground non-pressure applications — Test method for leaktightness of elastomeric sealing ring type joints.
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading.
Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test).
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (notch test).
Polyethylene(PE) pipes and fittings - Determination of the tensile strength and failure mode of test pieces from a butt-fused joint.
Standard provides the qualification procedure for type approval of the tightness of hermetically sealed and closed components, joints and parts used in refrigerating systems and heat pumps as described in relevant parts of ISO 5149.
Plastics piping systems – Thermoplastics pipes and fittings for hot and cold water – Test method for the resistance of mounted assemblies to temperature cycling (equivalent to ISO 19893).
Specifies the characteristics of the fitness for purpose of crosslinked polyethylene (PE-X) piping systems intended to be used for hot and cold water installations.
Plastics - Determination of environmental stress cracking (ESC) of polyethylene - Full-notch creep test (FNCT).
Specifies requirements for polyethylene (PE)-based piping systems used for gaseous fuels, including multilayer pipes and fittings. Performance tests such as hydrostatic pressure resistance, thermal stability, dimensional accuracy, and marking verification.
Determination of Charpy impact strength. For conducting resilience tests on rigid plastic materials in order to determine their impact fragility characteristics under standard stress conditions.
Determinaton of Izod impact strength. For conducting resilience tests on rigid plastic materials in order to determine their impact fragility characteristics under standard stress conditions.
Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling (equivalent to EN 12 293).
International standard that specifies the test method for determining the longitudinal reversion of thermoplastics pipes when exposed to heat.
Superseeded by ISO 2505:2023. Polyethylene pipes (PE) - Longitudinal reversion - Test methods and specification.
Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST).
Plastics piping systems - Plastics components - Determination of dimensions.
Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method.
The standard specifies two methods of testing for checking the leaktightness of assembled joints between mechanical fittings and plastic pressure pipes with diameters up to and including 63 mm.
Superseeded by ISO 2505:2023. Polypropylene (PP) pipes - Determination of longitudinal reversion.
Specifies methods for leak tightness and pressure cycling tests on plastics fittings. Explicitly mentions cyclic internal pressure tests as part of performance testing.
ISO 4427-1:2007 specifies the general aspects of polyethylene (PE) piping systems (mains and service pipes) intended for the conveyance of water for human consumption, including raw water prior to treatment and water for general purposes. It also specifies the test parameters for the test methods to which it refers.
Plastics - Unplasticized cellulose acetate; determination of moisture content.
Plastics - Unplasticized cellulose acetate; determination of moisture content.
Plastics - Determination of apparent density of material that can be poured from a specified funnel.
Thermoplastics pipes - Determination of tensile properties.
Polyolefin pipes and fittings; Determination of carbon black content by calcination and pyrolysis; Test method and basic specification.
Plastics - Determination of temperature of deflection under load.
Plastics - Determination of tensile-impact strength.
Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT).
Thermoplastics pipes - Determination of creep ratio.
Thermoplastics pipes - Determination of ring stiffness.
Standard provides requirements for the manufacture and qualification of spoolable reinforced plastic line pipe in oilfield and energy applications.
Nonelectrical refrigerant-containing components and accessories, intended for field installation in accordance with the Safety Code for Mechanical Refrigeration, ASHRAE 15.
Discover how unique features and engineered solutions can help you optimize your test procedures. Visit our 360° Universe with interactive 3D visuals and videos of the SCITEQ equipment.
Experience it hereWe are at your disposal for any questions, comments and suggestions. We look forward to hearing from you.
Feel free to contact us using the contact form below.
We strive to answer all inquiries within 24 hours (on working days).
