Pipe and fitting testing

SCITEQ develops and produces laboratory testing equipment of the highest standard to producers of pipes and fittings worldwide, from complete laboratories to single products. SCITEQ equipment for pipe and fitting testing is listed below. Please feel free to contact us for further information and in case you have special requirements.

Products pr. page: 10 25 50 All
item.Name

SCITEQ X-ACT pressure

For pressure testing plastic pipes and fittings in PE, PEX, PVC, PP, PB etc., glass fibre pipes, tubes and hoses. The system is a modular airless pressure testing system with unparalleled accuracy no matter what size sample is connected to the system. One cabinet contains up to 50 (up to 60 on request) individual pressure stations.

View product
item.Name

SCITEQ X-ACT series BASE


For pressure testing plastic pipes and fittings in PE, PEX, PVC, PP, PB etc., glass fibre pipes, tubes and hoses. The BASE unit is an all-in-one pressure testing unit with integrated high pressure pump and up to 5 independent pressure stations.

View product
item.Name

SCITEQ X-ACT series HCP

For pressure testing of large PE pipe samples and fittings. The High Capacity Pressure (HCP) testing system offers up to two constant pressure stations and 1 burst station up to 300 bar.

View product
item.Name

SCITEQ X-ACT series DYNAMIC


For performing sinusoidal and trapezoidal pressure curves at a speed up to 1Hz cycle time. Up to three samples can be tested simultaneously depended on size, material and length. The Dynamic Pressure tester has been designed with the needs of the hose manufacturer in mind.

View product
item.Name

SCITEQ's PC SCITEQ software

SCITEQ's own Windows based PC software enabling remote control, test logging and report generation. Software is compatible with all of the SCITEQ-2000 and X-ACT generation of pressure testing systems.

View product
item.Name

SCITEQ end closures 1520


For internal hydrostatic pressure testing of pipes. The end closures seal off the sample in order to generate internal pressure in the sample. Max. pressure depends on pipe diameter and test standard.

View product
item.Name

SCITEQ end closures air frame 1525


For internal hydrostatic pressure testing of pipes and fittings. The end closures seal off the sample in order to generate internal pressure in the sample. Max. pressure is up to 40 bar depending on pipe diameter and test standard.

View product
item.Name

SCITEQ end closures with tie-bar (rod) 1530


For internal hydrostatic pressure testing of pipes. The end closures seal off the sample in order to generate internal pressure in the sample.

View product
item.Name

SCITEQ end plugs for fittings


For internal hydrostatic pressure testing of fittings. The end plugs seal off the sample in order to generate internal pressure in the sample.

View product
item.Name

SCITEQ end closures mounting / demounting machine


For handling heavy, large pipe samples and end closures up to Ø1600 mm conveniently and efficiently.

View product
item.Name

SCITEQ thermo tank ECO line


For hydrostatic pressure testing of pipe samples by immersing samples in water at accurately controlled temperatures. Also suitable for conditioning samples requiring controlled temperature immersion.

View product
item.Name

SCITEQ 0 degree tank ECO line


For conditioning pipe samples required for e.g. impact testing and for the RCP test where the test specimen must be conditioned at 0°C.

View product
item.Name

SCITEQ impact tester B50

For determining the impact resistance of thermoplastic pipes according to staircase method and round-the-clock method. Extensive range of weights available.

View product
item.Name

SCITEQ pendulum impact tester (Charpy or Izod)


For conducting resilience tests on rigid plastic materials in order to determine their impact fragility characteristics under standard stress conditions.

View product
item.Name

SCITEQ conditioning chamber


For conditioning pipe samples at specified temperatures for e.g. impact tests, RCP (Rapid Crack Propagation) tests and other similar tests. The SCITEQ conditioning chamber is capable of cooling samples up to very large dimensions.

View product
item.Name

SCITEQ methylene chloride tester

For determining the resistance of PVC-U pipes to dichlormethan at a specified temperature. Determination of the gelation level in PVC pipes and profiles by means of the MC test (1 temperature) or the MCT test (2 temperatures).

View product
item.Name

SCITEQ glycerine tester

For longitudinal (heat) reversion testing of plastic pipe samples by means of heated liquid (glycerine).

View product
item.Name

SCITEQ parallel scratcher


For marking pipes around the circumference before carrying out longitudinal (heat) reversion tests. Both a table model and a portable model available. Further, a table model for inside marking of corrugated/rib pipes available.

View product
item.Name

SCITEQ heating oven


For carrying out longitudinal / heat reversion tests of plastic pipe samples by means of heated air. Also for general use in laboratories.

View product
item.Name

SCITEQ CNC copy milling machine


For preparing plastic samples (sometimes referred to as “dumbbell” specimens or “dogbone” specimens) for e.g. tensile tests and other kinds of elongation tests.

View product
item.Name

SCITEQ HDT/Vicat tester


For determining the Vicat softening temperature and the heat deflection temperature under load on plastics and thermoplastics, available with 3 or 6 testing stations.

View product
item.Name

SCITEQ axial notch milling machine


For preparing pipe samples for the notched stress crack resistance test at a specified temperature (test method for slow crack growth on notched pipes (notch test)).

View product
item.Name

SCITEQ circumference tapes / calliper rulers


For determining dimensions. Circumference tapes for determining the outside diameter of pipes (calibration certificate available) and calliper rulers for determining out-of-roundness of pipes. General measuring devices.

View product
item.Name

SCITEQ Rapid Crack Propagation tester (RCP)


For determining arrest or propagation of a crack initiated in a thermoplastic pipe intended for the supply of gases or liquids at a specific temperature and internal pressure. Small-scale steady-state test (S4 test).

View product
item.Name

SCITEQ laboratory freezer


For preparing and conditioning pipe samples for determination of for instance rapid crack propagation (RCP) (thermoplastics pipes) and other tests.

View product
item.Name

SCITEQ thermal cycling systems


For determining the leakage status of composite pipes and fittings when subjected to specified cycling times under specified internal pressure load.

View product
item.Name

SCITEQ pipe wall thickness gauge


For measuring the pipe wall thickness of plastic pipe samples by means of a digital measuring gauge.

View product
item.Name

SCITEQ cone tester – resistance to slow crack growth


For preparing pipe samples for determination of resistance to slow crack growth – cone test method.

View product
item.Name

SCITEQ laboratory saw


For preparing plastic pipe samples for various tests by making a parallel cut and chamfering the finished edge. Typical tests requiring sample preparation are internal pressure, MCT, heat reversion, dimensions control and impact testing.

View product
item.Name

SCITEQ universal testing machine

For performing tensile, compression, and bending tests according to a large variety of international standards.

View product
item.Name

SCITEQ ring stiffness tester


For determining ring stiffness, ring flexibility and creep ratio of pipes.

View product
item.Name

SCITEQ leak tightness tester


For determining the leak tightness of elastomeric sealing ring type joints for buried thermoplastics non-pressure piping systems.

View product
item.Name

SCITEQ drop tester

For determining the drop impact resistance of blow-molded thermoplastic containers by dropping a conditioned container filled with water from a platform onto a prescribed surface. Falling height 0.5-3 m and a max. load of 300 kg.

View product
item.Name

SCITEQ point load tester

SCITEQ‘s Point Load tester is used for determining the resistance to slow crack growth of polyethylene pipes with external point load. The PLT system complies with PAS 1075:2009 Annex A3. PAS 1075 defines characteristics, requirements and test methods for pipes made of PE for alternative installation procedures.

View product
item.Name

SCITEQ valve endurance tester

SCITEQ’s valve endurance tester (VET) is a sophisticated piece of equipment designed to establish the endurance of single taps, combination taps or ball valves.

View product
item.Name

SCITEQ Box Loading Test System (BLT)

The SCITEQ box loading test (BLT) system is designed in accordance with ISO 13260 for determination of resistance to combined temperature cycling and external loading of thermoplastics piping systems.

View product
Previous page 1 Next page