Archive

 

News pr. page: 10 25 50 All
VET - valve endurance tester

NEW! Groundbreaking valve and tap tester

SCITEQ's valve endurance tester (VET) is a sophisticated piece of equipment designed to  establish whether single taps, combination taps or ball valves are able to resist the stress and impact they are subjected to through time. Testing of mechanical endurance occurs in accordance with EN 200:2008 section 12.1 and EN 13828 section 7.6.

By means of this tester it is possible to perform independent testing and obtain traceability on the endurance of the taps and ball valves in question. This will be a valuable tool in the required Quality Control documentation process.

Please contact SCITEQ for more information

 

 

October 2014

Interplas UK 2014

Interplas UK 2014

SCITEQ is of course participating in this event in Birmingham along with our long-term representative John Woods & Associates. The show starts 30 September and ends 2 October. Meet us in stand G33.

September 2014

X-actly! Absolute measurements and raw material savings

X-actly! Absolute measurements and raw material savings

Quality control and auto-adjustment directly on the pipe production line.

SCITEQ is introducing a ground-breaking combination of our well-known X-ACT technology and our adjustable calibrating sleeves, creating a brand new way of controlling pipe production directly on the line.

SCITEQ's latest innovation is a unique - and automatic - system capable of measuring and adjusting the pipe diameter and wall thickness continuously and fully automatic to keep both within minimum tolerances. As you know, minimum tolerances means money saved on expensive raw material.

Traditional systems, such as ultrasonics, do not offer absolute values and measurements are non-traceable. With this development we provide "absolute measurements", meaning real, hard-core reliable measurements. No more guesswork, no more fiddling with experimental adjustments forth and back.

Absolute measurement is absolutely what you need - we call our system Down Stream Closed Loop.

Please contact SCITEQ for more information

May 2014

Perform the Box Loading test with SCITEQ

Perform the Box Loading test with SCITEQ

SCITEQ stands out again with the latest development within test equipment for pipes and fittings. This time we step ahead of competition with our box loader.

SCITEQ's box loader performs two methods for testing pipes and fittings or joints for their resistance to deformation and leakage, when subjected to sustained external loading in conjunction with the passage of hot water. A pipe/fitting sample is placed on gravel bed and covered with gravel. A constant vertical load is applied via the gravel and temperature cycling is performed. Vertical deflection of the test piece is measured. All in compliance with ISO 13260.

Interested? Please contact SCITEQ for further information.

March 2014

SCITEQ now present in Colombia

SCITEQ now present in Colombia

We are pleased to introduce our new representative in Colombia Mr. Juan Fernando Jaramillo from the company POLIMAQ. Mr. Jaramillo has an extensive experience in the plastics industry and we are looking forward to our future cooperation. For contact details please "America - North and South".

December 2013

New equipment: Point Load Tester

New SCITEQ equipment: Point Load Tester

SCITEQ's Point Load tester is used for determining the resistance to slow crack growth of polyethylene pipes with external point load. The PLT system complies with PAS 1075:2009 Annex A3. PAS 1075 defines characteristics, requirements and test methods for pipes made of PE for alternative installation procedures. For more information please  contact SCITEQ.

November 2012

Feature: Upgrade your pressure testing equipment

Feature: Upgrade your pressure testing equipment

Upgrade your well-known S12 control unit to the latest control unit, the S40 controller and experience a range of new advantages. The new controller provides you with several new and useful functionalities that will make pressure testing easier and more efficient.

  • More stations per controller - now up to 10 stations per S40 controller. Previously only 5 stations. 
  • Online support via internet (S40 + PC SCITEQ) - this ensures fast and to-the-point technical support from headquarters.
  • Faster communication - Ethernet communication and real time data logging.
  • Data storage - Flash memory and SD card
  • New control panel with colour display and useful graphical overview of station status.

To find out more please contact our service department service@sciteq.com or +45 8696 1933.

 

October 2012

In need of even better pipes?

In need of even better pipes?

As a brand new initiative SCITEQ now offers adjustable calibrating sleeves for plastic pipe manufacturers. The sleeves optimise the plastic pipe production securing easy control of the pipe diameter which can be varied with a high degree of accuracy, all while maintaining roundness. Please click here for more details on our new range of adjustable calibrating sleeves.

September 2012

A challenge to handle large pipe samples and end closures?

A challenge to handle large pipe samples and end closures?

SCITEQ has developed a mounting / demounting machine for this exact purpose. See our brochure "End closure mounting machine" and feel free to contact us for more information.

September 2012

Pressure testing plastic fittings?

Pressure testing plastic fittings?

SCITEQ has designed a new system to test for instance V-fittings and T-fittings. See our brochure "End plugs for fittings" and feel free to contact us for more information.

September 2012

1 2 Next page